Festool Granat 5" 220 Grit review

Name: Festool Granat 5-Inch Disc, 220 Grit (25-pack)
Brand: Festool

Form

Discs

Grit

220 grit

Material

ceramic

The verdict

Where this pick fits.

220 is the dress rehearsal for the finish coat. Granat does it with ceramic grain that actually cuts at this grit instead of just polishing the surface into submission.

220. The dress rehearsal. Granat makes sure the surface shows up ready.

Quick take

Best for: pre-finish hardwood, between coats, Festool sanders
Format: Discs
Tier: Pro tier
Grit lane: 180, 220

Use it when

The fit is obvious.

· Reach for the Festool Granat 5" 220 Grit when the job is pre-finish hardwood, between coats, and Festool sanders: that is the fight it was built for.
· Ceramic grain fractures into fresh edges as it wears, so it stays hungry long after cheaper grit goes dull and starts rubbing instead of cutting.
· This is the working middle: enough bite to matter, refined enough to leave the job somewhere worth continuing.

Skip it when

The job asks for something else.

· Leave it if you are actually solving a different stage of the climb than the one this pick was chosen for.
· Leave it if the budget is tight enough that value-per-pack matters more than top-end feel and longevity: good mid-tier paper will get you there slower.
· Leave it if the work is edges, profiles, and tiny repairs: those are easier to control by hand.

Best for

Where it earns its keep.

· pre-finish hardwood
· between coats
· Festool sanders

Keep moving

Useful next clicks.

Festool Granat grit chartCeramic plus aluminum oxide, P-graded, anti-clog. With the Rotex vs ETS question answered.Read the grit chartSee where this pick sits in the full climb.Browse projectsSee the exact grit climb for your job.

Buyer questions

The practical questions.

What is the Festool Granat 5" 220 Grit actually good at?

220 is the dress rehearsal for the finish coat. Granat does it with ceramic grain that actually cuts at this grit instead of just polishing the surface into submission. In short: it earns its keep on pre-finish hardwood, between coats, and Festool sanders.

Is 220 the right grit lane for this?

It sits closest to 180 grit and 220 grit. This is the working middle of most sanding progressions: enough bite to matter, refined enough not to leave the job stranded.